BUS WASH VFD CUT SHEET 1
CustomKraft Variable Frequency Drive (VFD) ETL and CETL listed Electrical: 208 or 230 volts alternating current (VAC) 3 phase 60 hertz 20 amperes (14.1 minimum current ampacity per drop) Hard-wire connections to on-board disconnect Water: 4.0 gallon per minute (gpm) per bay (gravity-fed from stainless steel tank module) Slip-on hose connections - equipment fully connected Stainless steel tubular frame with anodized aluminum backboard and stainless steel electrical enclosure with high-voltage lock-out Electric Motor: Baldor® 5 horsepower (hp) 3 phase Model M3218TA with automatic thermal protection High-pressure Pump: CAT® positive displacement plunger pump Model 5CP2120W lifetime warranty on discharge manifold Control Circuit: 100 VA fused transformer/secondary 24 VAC (3.2 amps) Compressed Air: 2 CFM @ 80 psi per bay (not to exceed 100 psi and and/or dispensed fluid not to exceed 110o F) Slip-on hose connection to foam board(s) - hose provided with equipment Stainless steel tubular frame with individual compartmentalized stainless steel tanks. …
Download the original document · Plain text (TXT) · Browse the archive · How this archive works
Original source: https://dpp.vi.gov/wp-content/uploads/2017/11/BUS-WASH-VFD-CUT-SHEET-1.pdf
SHA-256 05f5a47b0f0aaeb63549462b8e16ad619f14ef75aa8c431687284784d2093314
Re-using this document
A public record of the Government of the Virgin Islands, published by the agency itself. No copyright is asserted on it and 17 U.S.C. § 105 does not reach territorial government, so it publishes as a territorial public record.
Our description, tagging, arrangement, extracted text and machine transcripts are released under CC0 1.0. We assert nothing about the document itself.
Archive identifier LF-05f5a47b0f0a
Document text
CustomKraft Variable Frequency Drive (VFD) ETL and CETL listed Electrical: 208 or 230 volts alternating current (VAC) 3 phase 60 hertz 20 amperes (14.1 minimum current ampacity per drop) Hard-wire connections to on-board disconnect Water: 4.0 gallon per minute (gpm) per bay (gravity-fed from stainless steel tank module) Slip-on hose connections - equipment fully connected Stainless steel tubular frame with anodized aluminum backboard and stainless steel electrical enclosure with high-voltage lock-out Electric Motor: Baldor® 5 horsepower (hp) 3 phase Model M3218TA with automatic thermal protection High-pressure Pump: CAT® positive displacement plunger pump Model 5CP2120W lifetime warranty on discharge manifold Control Circuit: 100 VA fused transformer/secondary 24 VAC (3.2 amps) Compressed Air: 2 CFM @ 80 psi per bay (not to exceed 100 psi and and/or dispensed fluid not to exceed 110o F) Slip-on hose connection to foam board(s) - hose provided with equipment Stainless steel tubular frame with individual compartmentalized stainless steel tanks. Air-diaphragm Pump(s): Flojet Model G57 for foam applications Connect to foam boards with slip-on hose connections - hose provided with equipment. Drive System: Timing belt drive System Dimensions: 55” width x 25” depth x 78” height (system includes two pump modules, four stainless tanks on top row only and foam brush board is moved under tanks, where bottom row of tanks are pictured)