IEKHS JROTC STRIPING Detail DWG 2
Existing retaining #4 DOWELS AT 12” 0.C, EMBEDDED 3” MININUM INTO EXISTING CONCRETE SLAB WITH SIMPSON EPOXY SYSTEM OR APPROVED EQUAL EXISTING BUILDING & SLAB 6MIL_ POLYETHYLENE VAPOR BARRIER OR EQUAL (typ.) 5” THICK (min.) SLAB (typical) 17-0” +——F 7 xox 10-10 WELDED _- WIRE FABRIC (typical) = —} — OR #3’s AT 10” 0.C EACH WAY LA SAS See See AGGREGATE BASE . <ot UNDER CONCRETE(asphaltic) 1/2” PREMOLDED UNDISTURBED GRADE FILLER WITH BITUMINOUS R 95% COMPACTED FILL SEAL AT TOP (typical) DETAIL AT EXISTING CORRIDOR CONC. SLAB AND NEW CONCRETE SLAB FOR JROTC DRILL TRAINING EXISTING CLASS ROOM BUILDING. 105’-1” EXISTING EXISTING DRIVEWAY CORRIDOR 3” minimuny wide Burgundy painted strip | EXISTING CLASS ROOM BUILDING. | There shall be no space between Burgundy and Yellow lines. Graphic representation is solely for clarity, visualization and differentiation of colors 5” THICK CONCRETE SLAB— TROWEL FINISH | 3” minimum wide Yellow painted strip , | I\ ccstng electric conduit beneath | slab (field verify) | _90'-0” ? 11» 8'-1074 There shall be no space between Burgundy and Yellow lines. …
Download the original document · Plain text (TXT) · Browse the archive · How this archive works
Original source: https://dpp.vi.gov/wp-content/uploads/2018/06/IEKHS-JROTC-STRIPING-Detail_DWG-2.pdf
SHA-256 ac2b87f93b856320c6fac1528fdab49ece42b2d9d38827736c302a6a5a21f763
Re-using this document
A public record of the Government of the Virgin Islands, published by the agency itself. No copyright is asserted on it and 17 U.S.C. § 105 does not reach territorial government, so it publishes as a territorial public record.
Our description, tagging, arrangement, extracted text and machine transcripts are released under CC0 1.0. We assert nothing about the document itself.
Archive identifier LF-ac2b87f93b85
Document text
Existing retaining #4 DOWELS AT 12” 0.C, EMBEDDED 3” MININUM INTO EXISTING CONCRETE SLAB WITH SIMPSON EPOXY SYSTEM OR APPROVED EQUAL EXISTING BUILDING & SLAB 6MIL_ POLYETHYLENE VAPOR BARRIER OR EQUAL (typ.) 5” THICK (min.) SLAB (typical) 17-0” +——F 7 xox 10-10 WELDED _- WIRE FABRIC (typical) = —} — OR #3’s AT 10” 0.C EACH WAY LA SAS See See AGGREGATE BASE . <ot UNDER CONCRETE(asphaltic) 1/2” PREMOLDED UNDISTURBED GRADE FILLER WITH BITUMINOUS R 95% COMPACTED FILL SEAL AT TOP (typical) DETAIL AT EXISTING CORRIDOR CONC. SLAB AND NEW CONCRETE SLAB FOR JROTC DRILL TRAINING EXISTING CLASS ROOM BUILDING. 105’-1” EXISTING EXISTING DRIVEWAY CORRIDOR 3” minimuny wide Burgundy painted strip | EXISTING CLASS ROOM BUILDING. | There shall be no space between Burgundy and Yellow lines. Graphic representation is solely for clarity, visualization and differentiation of colors 5” THICK CONCRETE SLAB— TROWEL FINISH | 3” minimum wide Yellow painted strip , | I\ ccstng electric conduit beneath | slab (field verify) | _90'-0” ? 11» 8'-1074 There shall be no space between Burgundy and Yellow lines. Graphic representation is solely for clarity, visualization and differentiation of colors | 3” minimum \wide Yellow painted strip 3” minimum wide Burgundy painted strip 3° |minimum wide Yellow painted s#ip | 3” minimum wide Yellow painted strip IN QP Existing Swale Proposed concrete Swale (if required 3” minimum wide Burgundy painted strip Proposed JROTC Drill Training Striping Layout Existing Concrete curb wall 40’—0” New Sod to be a > installed within this area Training area is approximately 5,325 square feet Poured concrete slab is approximately 83 cubic yards Curb wall and footing is approximately 108 linear feet Poured concrete curb wall is approximately 6 cubic yards Poured concrete curb wall footing is approximately 5 cubic yards NOTE: Contractor shall field verify all dimensions and conditions SCALE: 1/8°=1'-0” New Sod to be installed within this area Deferred Maintenance Repair Program DMRP Program Approved DOI-IOA ABC Initiative Work Plan REMARKS REVISIONS DATE NO. Proposed IEKHS-JROTC Drill Training Site IVANNA EUDORA KEAN HIGH SCHOOL Parcel No. 1&2 Nazareth, St. Thomas, USVI DRAWN BY: CHECKED BY: APPROVED BY: CONTRACT NO.: PROJECT NO.: DATE: Engineers Approval sheet No: AD SHEET NO. OF SHEETS